SCM-MFD-Kit | MFD Light Controller

About the SCM-MFD-Kit

The SCM-MFD-Kit transforms your multi-function display into a powerful and easy-to-use light controller. It works with most major MFD brands including Garmin™, Simrad, Lowrance®, B&G, Raymarine®, and Furuno.

Setup is easy. Simply plug into your MFD’s network interface and follow the easy on-screen setup instructions. There are no complex instructions to follow and no additional software to install.

Your lighting is divided into six zones. Each zone can be controlled by itself or together with other zones. Set your underwater lights to one color and brightness, under-gunnel lighting to another, overhead lights to a third, and courtesy lights to something completely different. Or, press the ALL button and sync all your lights together.

Control color and brightness. Fade a single color or fade between different colors. Make your lights flash, rotate between colors, or even dance to music. The SCM-MFD-Kit puts you in control!

Price: $549.00

MFD Light Controller

  • Control all of your boat’s RGB, RGBW, multi-color, and single color accent lights.
  • Tune RGB and RGBW lights to an almost unlimited number of colors.
  • Fade a single color or multiple colors.
  • Or, change between multiple colors without the fade.
  • Strobe a single color at whatever speed you want.
  • Sync lights to the music playing through the boat’s audio system.
  • Control everything through your multi-function display.


  • SCM-MZ-LC Multi-Zone Lighting Controller
  • SCM-MFD-Bridge
  • 1-meter Shadow-Net communication cable.
  • Standard ethernet cable (Adapter may be required)
  • Mounting hardware.
  • Quick start guide.
  • 2-year warranty.
  • Made in the USA


The SCM-MFD-Kit includes two IP65 washdown-rated boxes.


  • Acts as a central location to wire, power, and control all lights.
  • Four sets of color-coded connectors make wiring simple and mistake-free.
  • Each light gets its own fuse. Protects your lights and simplifies troubleshooting.
  • Wiring is protected from moisture. You’ll have fewer corrosion problems.
  • Includes two control wires for Shadow-Net enabled lights and a 3.5mm female audio jack for music sync.
  • Supplies power to lights wired to the SCM-MZ-LC. Greatly reduces voltage drop.
  • Includes Shadow-Net Technology for advanced control over your lights.


  • Acts as a communication bridge between SCM-MZ-LC and your Multi-function Display.
  • Connects to SCM-MZ-LC through a Shadow-Net communication cable. (1-meter cable included)
  • Connects to MFD through a standard ethernet cable. (Cable provided. However, a manufacturer adapter may be needed.)



  • Dimensions: 6.3” W x 3.5” H x 2” T
  • IP65 washdown-rated polycarbonate housing.
  • 10 to 30 volts input. Works with 12 volt or 24 volt systems.
  • Power Output: 250W of RGBW lights at 20 Amps.
  • ATC fuse circuit protection.


  • Size: 5.1″ W x 2.7″ H x 2″ T
  • IP65 washdown-rated polycarbonate housing.
  • Includes mounting hardware and instruction manual.