SCM-MFD-LC-Kit

$649.00

The Shadow-Caster SCM-MFD-LC-Kit transforms your compatible multi-function display into a powerful and easy-to-use light controller. It works with most major MFD brands including Garmin™, Simrad, Lowrance®, B&G, Raymarine®, and Furuno.

The kit includes an SCM-MFD-Bridge, SCM-MZ-LC light controller, a 1-meter Shadow-Net communication cable, and a standard ethernet cable. An adapter may be required for some MFD’s.

Setup is easy. Simply plug into your MFD’s network interface and follow the easy on-screen setup instructions. There are no complex instructions to follow and no additional software to install.

SKU: scm-mfd-kit Category:

Description

Features
What’s Included In The SCM-MFD-LC-Kit

  • SCM-MZ-LC Multi-Zone Lighting Controller
  • SCM-MFD-Bridge
  • 1-meter Shadow-Net communication cable.
  • Standard ethernet cable (Adapter may be required)
  • Mounting hardware.
  • Quick start guide.
  • 2-year warranty.
  • Made in the USA

SCM-MFD-Bridge

  • Acts as a communication bridge between your Multi-function Display and the SCM-MZ-LC light controller.
  • Connects to MFD through a standard ethernet cable.
  • Cable provided. However, a manufacturer adapter may be needed.
  • Connects to SCM-MZ-LC through a Shadow-Net communication cable. (1-meter cable included)

SCM-MFD-LC

  • The controller is built inside a watertight box that protects wiring from moisture. You’ll have fewer corrosion problems.
  • It provides a central location to wire, power, and control up to four sets of lights and control two additional sets.
  • Each light connects to its own color-coded connectors. This makes wiring simple and mistake-free.
  • Each set of connectors has its own fuse. This protects your lights and simplifies troubleshooting.
  • Control wires allow you to connect to underwater lights. A 3.5mm female audio jack connects the controller to your audio system for music sync.
  • Supplies power to lights wired to the SCM-MZ-LC. This greatly reduces voltage drop.
  • Includes Shadow-Net Technology for advanced control over your lights.

Additional information

Specifications

SCM-MFD-Bridge
Size: 5.1″ W x 2.7″ H x 2″ T
IP65 washdown-rated polycarbonate housing.
Includes mounting hardware and instruction manual.

SCM-MZ-LC
Dimensions: 6.3” W x 3.5” H x 2” T
IP65 washdown-rated polycarbonate housing.
10 to 30 volts input. Works with 12 volt or 24 volt systems.
Power Output: 250W of RGBW lights at 20 Amps.
ATC fuse circuit protection.

Compatible MFD's

– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – GARMIN
Model: One Helm Compatible
Needed Cables:
PN: 010-11425-09 Cable
PN: 010-10580-10 Isolator

SIMRAD
Model: NSO EVO3, NSO EVO2, Go Series (Excluding G05)
Needed Cables: PN: 000-0127-56
Model: NSS EVO3
Needed Cables: None

LOWRANCE
Model: HDS LIVE, HDS CARBON
Needed Cables: PN: 000-0127-56

B&G
Model: VULCAN, ZEUS3
Needed Cables: PN: 000-0127-56

RAYMARINE
Model: Axiom Series with Lighthouse 4.11 software or later
Needed Cables: PN: A80247

FURUNO
Model: NavNet TZtouch3
Needed Cables: None